News
ZMT R&S GmbH actual:
-
Optimization of measurement accuracy by using a laser system.
-
Motors of P - and PNC series (Klingelnberg - measuring machines), can be replaced by modern motor systems.
-
Repairing of measuring heads from Höfler - and Klingelnberg - Measuring Machines.
-
All conventionally measuring systems may be replaced by new systems.
-
Old servo amplifiers ( Discontinued models ) are replaceable by new systems.
-
If requested we offer to you a general reworking of your measuring machine.
Topical sales list:
| ZP 1000 |
Klingelnberg / Höfler |
| Workpiece diameter max. | 1000 mm |
| Traverse Z - Axis | 1100 mm |
| Module max. | 25 |
| Module Min. | 0,5 |
| Table load max. | 2000 Kg |
| Tip clearance | 30 / 1250 mm |
| Power requirement | 2,5 KW |
| Machine weight | 1,8 t |
| Space requirement | 2,00 x 2,00 x 3,5 m |
| Year Built | 1997 |
| OS evaluation computer | Windows 10 |
| Controller | ZEISS |
| ZP 630 / 1250 | Klingelnberg / Höfler |
| Workpiece diameter max. | 630 mm |
| Traverse Z - Axis | 1100 mm |
| Module max. | 20 |
| Module Min. | 0,5 |
| Table load max. | 350 Kg |
| Tip clearance | 30 / 1250 mm |
| Power requirement | 2,5 KW |
| Machine weight | 1,5 t |
| Space requirement | 2,30 x 2,30 x 3,25 m |
| Year Built | 2000 |
| OS evaluation computer | Windows 10 |
| Controller | ZEISS |
| ZME 632 |
| Workpiece diameter max. | 630 mm |
| Gear width | 500 mm |
| Module max. | 20 |
| Module Min. | 0,5 |
| Table load max. | 350 Kg |
| Tip clearance | 20 / 1000 (1500) mm |
| Power requirement | 2,5 KW |
| Machine weight | 1,5 t |
| Space requirement | 1,80 x 1,60 x 2,60 (3,10) m |
| Year Built | 1992 |
| OS evaluation computer | Windows 10 |
| Controller | ZEISS |
| EMZ 402 ( Klingelnberg / Höfler ) |
| Workpiece diameter max. | 400 mm |
| Gear width | 500 mm |
| Module max. | 20 |
| Module Min. | 0,5 |
| Table load max. | 350 Kg |
| Tip clearance | 30 / 1000 (1500) mm |
| Power requirement | 2,5 KW |
| Machine weight | 2,0 t |
| Space requirement | 2,30 x 2,30 x 2,6 (3,10) m |
| Year Built | 1996 |
| OS evaluation computer | Windows 10 |
| EMZ 631 |
| Workpiece diameter max. | 630 mm |
| Gear width | 500 mm |
| Module max. | 20 |
| Module Min. | 0,5 |
| Table load max. | 350 Kg |
| Tip clearance | 20 / 1000 mm |
| Power requirement | 1,0 KW |
| Machine weight | 2,2 t |
| Space requirement | 2,30 x 2,20 x 2,50 m |
| Year Built | 1990 |
| OS evaluation computer | Windows 7 |
| Controller | IBH – macro 30 |
| EMZ 630 |
| Workpiece diameter max. | 630 mm |
| Gear width | 500 mm |
| Module max. | 20 |
| Module Min. | 0,5 |
| Table load max. | 350 Kg |
| Tip clearance | 30 / 1250 mm |
| Power requirement | 1,0 KW |
| Machine weight | 2,5 t |
| Space requirement | 2,60 x0,90 x 2,40 m |
| Year Built | 1988 |
| OS evaluation computer | Windows 7 |
| Controller | IBH – micro |
| EMZ 400 |
| Werkstückdurchmesser max. | 400 mm |
| Radbreite | 300 mm |
| Modul max. | 15 |
| Modul Min. | 0,5 |
| Tischbelastung max. | 250 Kg |
| Spitzenabstand | 15 / 600 mm |
| Gesamtleistungsbedarf | 1,0 KW |
| Maschinengewicht ca. | 2 t |
| Raumbedarf ca. | 2,30 x 90 x 1,90 m |
| Baujahr | ---- |
| Betriebssystem Auswerterechner | Windows 7 |
| Steuerung | IBH – micro |
Prices on request This email address is being protected from spambots. You need JavaScript enabled to view it.